Production of silicone protective products should pay attention to what the details

by:Keyuan     2020-09-21
Silicone case, is the most common type of silicone industry in silicone products, hereinafter referred to as silica gel, silica gel protective sleeve includes a lot of kinds, in addition to the mobile phone cases, tablet computer cases, and other hardware products cases and some other needed to protect the equipment. If it is the case of digital electronic devices, it will have to protect the function of the digital electronic equipment, main characteristic is the drop, shock, dust, the most striking is the electronic equipment or the hardware fittings with this case, appearance is more conspicuous. And protective sleeve can realize a lot of color classification, such as red, light color, transparent color, there are some other dark, the effect of different color appear gives a person a kind of different aesthetic feeling. In silicone products manufacturer, do most of the digital electronic case, the most common or tablet cases, tablet area is large volume, rather than the entire product to get the hand phone, more heavy, sometimes it's easy to fall off onto the floor is scratched or broken directly, then silica gel protective sleeve can play its unique function, at this time from the above table fall off onto the floor, or a hand can do shock drop, to protect product from unnecessary damage. Silicone cases there are so many potential benefits, at the time of production of silica gel protective sleeve should be pay attention to some what? According to the function, the silica gel protective sleeve have such that we will rejoice in material production, shipment do percent of pass in 99. More than 98%. The production process to control the bad can decrease as far as possible to control the scope of the product appearance, no burr, no scratches, uniform color, no gradient color difference, to do these problems, in addition to a pay attention to process, and is more of the details of each step is very important, from raw material production to the finished product molding packaging outbound, all must make the environment clean and tidy, because the adsorption of silica gel products is easy to absorb the dust in the air, cause product surface have a lot of small black spots. Such products can be directly outbound, only good control every detail of the process, will only be reflected in the finished product, rather than later checks to modify. About the silicone factory: the production of silicone products is a complex process, the stand or fall of quality in addition to the machine and human factors. Intermediate inspection is the key to find and solve the major quality problems. Therefore, maintain the normal operation of the machine, mold good working state, strengthen the operation of the operator and qc personnel skills and quality consciousness training is the key to reduce production bad, is also the enterprise benefit.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...