Methods of making silicone dolls -
How to heat the silicone dolls
Interested in adult things people want to understand the methods of making silicone dolls, silicone dolls how to use the heating.
In order to ensure the safety of the silica gel doll, we can actually produce silicone doll myself.
In this way the production of silicone rubber was both cheap and safe.
Step forward: clay as a parting line, around all around in circles of the model.
Tip: you can use the common sludge, can also use the precision of the sludge.
Fine sludge can use clinker bag in hot water to soften, remove and use.
It can also be electric wind is softening.
, as shown on the outskirts of a circle of khaki is a boundary of the model, in the side of the model, the other side to do, so we can easy to install and disassemble later when injected into platinum silicon.
The second step: according to the proportion of 1:1 mixture of high viscosity platinum silicone, stir.
Step 3: the upper part of vaseline besmear is on facial model, and then coated with a layer of mixed platinum silicone.
Step 4: platinum silicone after curing, creating a layer of plaster or resin mold.
If it is need to wear gloves with resin, resin hand)
Step 5: do the upper surface of the effect.
The same method should do it again at the bottom of the head, make both sides of the mold closed together is a complete mold head.
Step 6: after mould use 24 hours a day, evenly coated inside the mold, the mold head fixed tightly, small viscosity platinum silicone good proportion of fill in the mold head, heat curing, improve efficiency, until fully cured.
Step 7: color: once you do, you can start coloring the silicone head.
Silicone around the spare part can use the knife carefully.
To dig out with a pair of beautiful eyes with a knife, and keep the position of the cosmetic contact lenses.
Can open your mouth when necessary.
Before the injection of silica gel, and can leave a hole in your mouth.
Step 8: in order to look beautiful, we have to do the hair, the hair can be sewn on the wigs, or buy a cover with AB glue.
Such a made of silica gel doll beautiful hair head is ready.
Silicone dolls how to heat the heating water, put the pillow should be able to better, or use more than heating rods is foshan silicone products factory give for silicone dolls producing method, the silicone dolls how to heat the related content, hope to be of help.
Foshan custom silicone products choose silicone products factory.
Worry about not having the desired effect, spend tens of thousands of pieces of that first experience 2109 new entity silica gel doll, consulting entity silica gel doll experience pavilion: 13509802066 (
WeChat with Numbers)
, near ZhangGe address in foshan, the first real silicone doll experience pavilion.
Recommend related news industrial silicon rubber tube silicone tube specifications silica gel insoles silicone gasket