Lamination technique of silicone products

by:Keyuan     2020-12-03
In the process of producing silicone products, some products need to be stick the process, such as plastic or rubber dipped back then the process is added outside the molding process. Silicone adhesive will off each other, so we should how to do ability to make silicone products good back glue? Below is a manufacturer of silica gel for you share the silicone products of gum operation skills. As we usually can see all kinds of silicone rubber pads, seals and other silicone products due to silicone rubber itself is away from the model, it is hard to with double-sided adhesive, pressure sensitive adhesive bonding material. It need to use a special treatment to deal with miscellaneous pieces of silicone rubber surface, make its can be closely fit with double-sided adhesive. 1. White lake oil or toluene will need silicone rubber miscellaneous pieces of stick double-sided adhesive area clean. 2. In proportion to join thinner, stir well. 3. Treatment evenly in the area of need back rubber miscellaneous pieces of silicone rubber, evenly daub to silicone rubber miscellaneous pieces placed in a cool and dry ventilated place after treatment. 4. Miscellaneous pieces of silicone rubber on the processor after natural drying, the double-sided adhesive on the silicone rubber miscellaneous pieces need to stick a double-sided adhesive area. When do the above process should also pay attention to the silicone and rubber material is different, miscellaneous pieces of silicone with silica gel treatment agent; Rubber button with a rubber treatment agent, a mixture of both misuse, otherwise it will lead to stick a double-sided adhesive of the come unglued after, even at the same time keep the double-sided adhesive area clean, so that the adhesive of miscellaneous pieces of silicone is not easy to fall off. The production of silicone products is a complex process, the stand or fall of quality in addition to the machine and human factors, process inspection is the key to find and solve the major quality problems. Therefore, maintain the normal operation of the machine, mold good working state, strengthen the operation of the operator and qc personnel skills and quality consciousness training is the key to reduce production bad, is also the enterprise benefit. Silicone manufacturers have long believed that, the environmental protection non-toxic silica raw materials into our hand, we also must produce environmental health silicone products, such as silicone stopper, nails, washers, silicone fresh cover, silicone brush to wash dishes, etc. This kind of silicone products. Over the past 20 years, silica gel products factory has been in production for the general consumers trust safe silicone products. Silica gel products factory integrity, strength and product quality obtain industry acceptance. Welcome friends from all walks of life come to visit, guidance and business negotiation.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...