how to shrink silicone
This material is actually called silicone rubber and is also one of the three types of silicone in the form of liquid and resin.
Heat-resistant silicone rubber can be prepared.
These silicone rubber are used for cooking and manufacturing.
However, when the introduction of high temperature, most silicone rubber becomes thicker, resulting in a shrinkage effect before final melting.
Fortunately, there is a way to shrink the mouth without melting, some branded phone covers and silicone rubber in other silicone rubber products.
Heat the water to hot water.
You need to roll and boil in a pot deep enough to allow the silicone rubber object to sink without touching the bottom of the pot.
The test method is to put the object into a cold pot and fill the pot with water until the object is completely submerged.
Remove the object before heating.
Put the silicone in the water for 10 to 15 seconds to soften.
Use pliers to place objects in boiling water without splashing water.
Set the timer to keep the time constant and avoid the melting of silicone rubber.
When the timer makes a sound, remove the object using pliers.
Dry silicone quickly.
Prepare the towel and dry the silicone rubber immediately.
Do not use a hair dryer as it may cause melting or further atrophy.
Apply the silicone to the object you are using.
Install the silicone rubber object on the product.
Bite your mouth in your mouth for a few seconds;
Silicone rubber objects, for example, will fit into the mobile phone, and the mouthpiece will form teeth.
Let the silicone cool on the object to tighten, or put the mouthpiece on one side to cool.
Repeat until the silicone is tightened to the size you need.
If the silicone rubber is too loose from the first attempt, repeat the process until it is appropriate.