how to print on silicone rubber
After all, you can\'t run it through your standard computer printer.
Even so, you can print on silicone rubber using age
Transfer the image you want directly to the old drawing technique on the rubber.
Draw the design you want to print on the card with a pen or pencil.
Keep the design simple and use a color.
Soften the details to simplified shapes because they don\'t translate well in the template.
Carefully cut the design with a sharp craft knife.
The design area you make will be thrown away.
You are making a negative space template so be careful not to cut nondesign areas.
Clean silicone rubber with warm soapy water and completely dry.
Tape the template you designed to rubber with the painter\'s tape.
Make the template as closely as possible with the surface.
Dip the sponge end of the sponge brush into the acrylic paint.
Apply paint along the crop area of the template with a smooth stroke.
When you want to avoid the paint crawling under the edge, be careful about the edge of the cut.
This can be avoided by applying paint on the edge of the design template.
Remove the tape from the painter and lift the template from the silicone rubber and move it away.
Removing the template before the paint dries will ensure that the paint does not stick to the card and will peel off later.
Allow the paint to dry completely for 24 hours.